OVER 50% OFF ultimate excellence in sound

6.5″ 2-Way Powered Carbon Fiber Studio Monitors (prototype pair) 650 Watt each

Original price was: AUD $12,205.00.Current price is: AUD $6,000.00. (inc GST)

**The Wayne Jones Audio One Click SoundID Reference Upload App**

Sonarworks' SoundID Reference profile can now be stored directly within Wayne Jones Audio Studio MonitorsSend stereo and multichannel bin files directly, via Ethernet, into WJA Studio Monitors with just one click. Including time alignment and gain. With continuity of dynamics, spatial  dimension, eq and phase. Suitable for 2.0 right through to 9.1.6 multichannel bin files. (read more)

Prototype Model
normally USD $7,811
SALE USD $3,562.91 (save $4,248.09)

New Model (November 2023) – Carbon Fiber Technology

  • New technology, new look, new features. Carbon fiber construction with 18mm MDF front and rear panels
  • Control panel now recessed on top of cabinet. This position allows optional mounting bracket to be fitted to rear.
  • Tweeter has been rotated horizontally and moved closer to the 6.5" driver
  • All models now incorporate an Ethernet connection for SoundID Reference calibration file uploads

Using Carbon fiber for the construction of the majority of cabinet panels provides a more consistent and even internal acoustic cabinet response. Makes for a smoother measurement curve when the initial cabinet measurements are taken. Improves the flat cabinet measurement result.

Ultra deep high gloss 2 Pak clear finish.

Weight advantages: A single WJA 1×6.5" 2 way Monitor is now approx. 3 kg lighter than previous MDF models. Now 10.7 kg previously 13.4 kg.

Perfect size for Broadcast Vehicles & Home Studios

High powered, mid/near-field 2-way studio monitor. 6.5, long stroke, ultra-low distortion driver with incredible clarity, musical with unbelievably tight low end reproduction. Bullet-style machined aluminium tweeter with a 1.46” voice coil. State of the art D Class switch mode power amp, 192 K SHARC DSP.

Stunning Frequency Response, Incredible phase & time alignment. Undeniably Accurate, Faultless Frequency Reproduction, Incredible Depth, Clarity & Dimension.

  • Stunning frequency response
  • Incredible accuracy
  • In phase with world leading transient response, allowing hyper accurate compression settings within the mix
  • Faster mix times
  • Less changes
  • Virtually no cross referencing
  • 650 Watts of power per Monitor
  • 35 Hz to 20 kHz flat
  • A bass response more musical than any sub combination
  • Packaged with SoundID Reference Studio Edition with Mic from Sonarworks
  • Finish – Stunning 2 Pak Automotive paint finish with high gloss or matte clear coats
  • Standard finish is Red or Graphite

Main Product Page for more Details, Reviews & Photos ►

Shipping costs are calculated on the Checkout page.
N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees.

Only 1 Remaining in Stock

Description

Wayne Jones Audio 6.5" 2-Way Monitors – "When Size Really Matters"
Perfect size for Broadcast Vehicles & Home Studios

More Product Details, Reviews & Photos ►

Cabinet Specifications

  • Finish – Ultra deep high gloss 2 Pak clear finish
  • Carbon fiber construction with 18mm MDF front and rear panels
  • Colour – Red

Cabinet Specs – for each cabinet:

  • Power: 650 Watts RMS powered
  • Channel 1: Bass-Mid – 500 Watts RMS @ 4 ohms
  • Channel 2: Tweeter – 150 Watts RMS @ 8ohms
  • Power Amp: State of the art D Class switch mode 2 channel power amp with heat sink plate mounted into the rear of the cabinet
  • Power Amp frequency: 20 Hz – 20 kHz
  • Cabinet tuning: 35 Hz to 20 kHz
  • Cabinet response: Half loudness Graphed down to 28Hz
  • HPF switch at 30 Hz
  • Drivers: Bass-Mid 6.5 inch, long stroke, ultra low distortion with incredible clarity, musical with tight bottom end
  • Magnet: Ferrite
  • Tweeter: Machined Aluminium 1.46" Voice coil, Kapton
  • Crossover point: 2.25 kHz
  • Control plate: Black Steel
  • Universal Mains Power in: Standard IEC

DSP & Control Plate Features

  • Inputs: XLR Analogue Balanced (with SPDIF option)
  • DSP – 192K SHARC processing
  • USB connector for WJ Audio use only. Used for software updates
  • Ethernet connection for SoundID Reference calibration file uploads
  • 3 Toggle switches with selections (centre position is Flat – undeniably accurate)
    • Inputs: XLR Analogue (center position mutes monitor)
    • Room 1: Inactive. For future development /
      Room 2: SoundID Reference calibration (preloaded with test profile)
    • Room 3: Inactive. For future development /
      30Hz HPF
  • LED on Control Panel for power operation

Single Monitor Dimensions:

  • H39 x W25 x D34 cm
  • H15.3 x W9.8 x D13.4 inches

Single Monitor Weight:

  • 10.7 kg
  • 23.6 lbs

Shipping Dimensions & Weights:
Shipped as one pair on a 1/2 size pallet (included in shipping weight & dimensions).
H 80 x W 60 x D 58 cm
29 kg / 64 lbs

 

 

SoundID Reference From Sonarworks With Microphone Included

SoundID Reference with Mic from Sonarworks now packaged with Wayne Jones Audio Studio MonitorsThe Wayne Jones Audio Studio Monitors are incredibly accurate in all areas. For potential room acoustic issues we bundle SoundID Reference with mic from Sonarworks measurement and correction program.  Read More ►

 

 

Ordering

As these are custom & hand made in Australia. If not in stock there could be a wait time of up to 8 weeks from time of order. We do carry minimal stock.

Payment

50% required at time of order with balance payable when ready to ship.

International shipping is by DHL Express.

Shipping & local duties & taxes are the customers responsibility
N.B. Australia currently has free trade agreement with USA

Warranty is 3 year limited on all parts & Labour


Shipping costs are calculated on the Checkout page.
N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees.

More Product Details, Reviews & Photos ►

Additional information

Weight 35 kg
Dimensions 80 × 60 × 58 cm
Shipping

Above dimensions and weight are shipping measurements for a pair of monitors (including shipping pallet) Shipping costs are calculated on the Checkout page. N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees. Products shipped from Melbourne, Australia. Shipped as one pair on a 1/2 size pallet (included in shipping weight & dimensions) H58 x W60 x D80 cm (23 x 23.6 x 31.5 in) Weight 35 KG (77.2 lb)

Colour

Red